Availability: | |
---|---|
Quantity: | |
CK-300
EUROSTAR OEM
8465960000
Tracked CK-300 Remote Control Gasoline Wood Chipper
Tracked CK-300 Remote Control Gasoline Wood Chipper is a drum chipper with track system, compact machine for chipper branches up to 10 cm in diameter, organic products both dry and wet. The new chipper CK-300 is equipped with a caterpilla base. With this new accessory it will be able to move on any terrain and load and unload the wood chipper from their vans in total autonomy. The machine with the most 'high productivity in its class, with two large rotor blades reversible steel long-term before their sharpening.
Thanks to the design of the rotor, branches, twigs and cuttings are dragged automatically inside without the aid of driving rollers. The centrifugal force created by the rotor ejects the shredded material in fine chips, projecting out from the exhaust, allowing easy loading in a container or trailer. The workload is about 800-1000KG per hour
Tracked CK-300 Remote Control Gasoline Wood Chipper Parameter
Tracked CK-300 Remote Control Gasoline Wood Chipper | ||
Model | CK-300 | |
Power Type | Gasoline/Diesel | |
Start Mode | Electric Start | |
Output Power | 7.5kW/8kW/9.2kW | |
Cutterhead diameter | 230mm | |
Cutterhead speed | 3400rpm | |
Working diameter range | 10-100mm | |
Workload per hour | 800-1000Kg/h | |
Blade specifications | A8-295*55*8 | |
Dimensions | 1800*670*1300mm | |
Total Weight | 244Kg | |
Movement method | Remote control self- propelled | |
Battery or cable specifications | 24V20AH 12V20AH | |
Maximum walking speed | 0-6KM/H | |
Tire Size | Track 150*60*57 |
Tracked CK-300 Remote Control Gasoline Wood Chipper
Tracked CK-300 Remote Control Gasoline Wood Chipper is a drum chipper with track system, compact machine for chipper branches up to 10 cm in diameter, organic products both dry and wet. The new chipper CK-300 is equipped with a caterpilla base. With this new accessory it will be able to move on any terrain and load and unload the wood chipper from their vans in total autonomy. The machine with the most 'high productivity in its class, with two large rotor blades reversible steel long-term before their sharpening.
Thanks to the design of the rotor, branches, twigs and cuttings are dragged automatically inside without the aid of driving rollers. The centrifugal force created by the rotor ejects the shredded material in fine chips, projecting out from the exhaust, allowing easy loading in a container or trailer. The workload is about 800-1000KG per hour
Tracked CK-300 Remote Control Gasoline Wood Chipper Parameter
Tracked CK-300 Remote Control Gasoline Wood Chipper | ||
Model | CK-300 | |
Power Type | Gasoline/Diesel | |
Start Mode | Electric Start | |
Output Power | 7.5kW/8kW/9.2kW | |
Cutterhead diameter | 230mm | |
Cutterhead speed | 3400rpm | |
Working diameter range | 10-100mm | |
Workload per hour | 800-1000Kg/h | |
Blade specifications | A8-295*55*8 | |
Dimensions | 1800*670*1300mm | |
Total Weight | 244Kg | |
Movement method | Remote control self- propelled | |
Battery or cable specifications | 24V20AH 12V20AH | |
Maximum walking speed | 0-6KM/H | |
Tire Size | Track 150*60*57 |
Tracked CK-300 Remote Control Gasoline Wood Chipper Details
Related products
YL- 22 Gasoline Leaf Shredder
Model | YL-22 | |
Power Type | Gasoline 190F | |
Start Mode | Manual | |
Output Power | 8kW/4.5kW | |
Cutterhead diameter | 344mm | |
Cutterhead speed | 3600rpm | |
Working diameter range | 10-50mm | |
Blade specifications | 120x34x4.6 2 pieces 305x50x5 1 piece | |
Feed port size | 48x42mm | |
Dimensions | 1100x780x705 mm | |
Total Weight | 84Kg | |
Movement method | Manual traction | |
Battery or cable specifications | None | |
Maximum walking speed | Pace speed | |
Workload per hour | 300-600Kg/h | |
Optional | Gasoline177F |
TL-CK300 Wood Chipper
Model | TL-CK300 | |
Power Type | Gasoline 190F | |
Start Mode | Electric Start | |
Output Power | 8kW | |
Cutterhead diameter | 230mm | |
Cutterhead speed | 3400rpm | |
Working diameter range | 10- 100mm | |
Workload per hour | 800-1000Kg/h | |
Feed port size | 60x60mm | |
Blade specifications | A8-295x55x8mm | |
Dimensions | 2500x950x1300 mm | |
Total Weight | 176 Kg | |
Movement method | Locomotive pulling | |
Battery or cable specifications | 12V20AH | |
Maximum walking speed | 0-40km/h | |
Tire Size | 400-8 | |
Optional | Diesel 190F | |
Diesel 192F |
Q-170 Q-200 Wood Chipper
Model | Q-170 | |
Power Type | Gasoline 170F | |
Start Mode | Manual | |
Output Power | 8HP | |
Cutterhead diameter | 180 mm | |
Cutterhead speed | 2900rpm | |
Working diameter range | 10-50mm | |
Workload per hour | 400-600 Kg/h | |
Feed port size | 400x1100x500 | |
Discharge port size | 150x800x100mm | |
Dimensions | 1100x600x1660 mm | |
Total Weight | 90 Kg | |
Optional | Gasoline 170F Electric Start | |
Diesel 173F Manual Start | ||
Diesel 173F Electric Start |
Model | Q-200 | |
Power Type | Gasoline 190F | |
Start Mode | Electric Start | |
Output Power | 11HP | |
Cutterhead diameter | 230 mm | |
Cutterhead speed | 3400rpm | |
Working diameter range | 10-100mm | |
Workload per hour | 400-800 Kg/h | |
Feed port size | 520x580mm | |
Discharge port size | 880x220x100mm | |
Dimensions | 1400x600x1100 mm | |
Total Weight | 140 Kg | |
Optional | 3 knives |
C-200 C-300 Diesel Horizontal Branch Grinder
Model | C-200 | |
Power Type | Diesel 190F | |
Start Mode | Electric Start | |
Output Power | 13HP | |
Cutterhead diameter | 230 mm | |
Cutterhead speed | 3400rpm | |
Working diameter range | 10-800mm | |
Workload per hour | 700-900 Kg/h | |
Blade specifications | A8-195*55*8 | |
Dimensions | 1500*600*1200 mm | |
Total Weight | 160 Kg | |
Feed port size | 520x580mm | |
Discharge port size | 880x220x100mm | |
Movement method | Manual traction | |
Battery or cable specifications | 36A-12V | |
Maximum walking speed | Pace Speed | |
Tire Size | 500-6 | |
Optional | Diesel 190F, 3 knives | |
Diesel 192F | ||
Diesel 192F, 3 knives |
Model | C-300 | |
Power Type | Diesel 190F | |
Start Mode | Electric Start | |
Output Power | 15HP | |
Cutterhead diameter | 230 mm | |
Cutterhead speed | 3400rpm | |
Working diameter range | 10-1000mm | |
Workload per hour | 900-1200 Kg/h | |
Blade specifications | A8-295*55*8 | |
Feed port size | 600x700mm | |
Discharge port size | 900x320x100mm | |
Dimensions | 1550*700*1200 mm | |
Total Weight | 185 Kg | |
Movement method | Manual traction | |
Battery or cable specifications | 36A-12V | |
Maximum walking speed | Pace Speed | |
Tire Size | 500-6 | |
Optional | Diesel 192F, 2 knives | |
Diesel 195F, 2 knives | ||
Diesel 190F, 3 knives | ||
Diesel 192F, 3 knives | ||
Diesel 195F, 3 knives |
BX Series PTO drive wood pulverizer
Model | BX42S | BX42R | BX62S | BX62R | BX72R | BX92R |
Chipper Capacity | 100mm | 100mm | 150mm | 150mm | 175mm | 200mm |
Diameter of blade | 630mm | 630mm | 740mm | 740mm | 740mm | 940mm |
Thickness | 18mm | 18mm | 25mm | 25mm | 28mm | 32mm |
Rotor plate weight | 44kg | 44kg | 86.5kg | 86.5kg | 86.5kg | 171kg |
Rated RPM | 540-1000 | 540-1000 | 540-1000 | 540-1000 | 540-1000 | 540-1000 |
Quantity of blade | 4 | 4 | 4 | 4 | 4 | 4 |
Knife Type | 65-Mn/A8 | 65-Mn/A8 | 65-Mn/A8 | 65-Mn/A8 | 65-Mn/A8 | 65-Mn/A8 |
Dimension of blades | 210x60x9mm | 210x60x9mm | 240x60x9mm | 240x60x9mm | 280x80x12mm | 320x100x17mm |
Feed port size | 520x520mm | 520x520mm | 620x620mm | 620x620mm | 830x600mm | 620x620mm |
Feeding System Feed | / | Hydraulic Feed | / | Hydraulic Feed | Hydraulic Feed | Hydraulic Feed |
Discharge port size | 100mm | 100mm | 150mm | 150mm | 200mm | 220mm |
Size of chippers | =6mm | ≤6mm | ≤6mm | ≤6mm | ≤9mm | ≤9mm |
Packing size | 1140x910x1240 | 1140x810x1920 | 1230x1000x1160 | 1220x910x1930 | 1690x1130x1380 | 1210x1130x2000 |
Overall size | 1470x1260x1650 | 1560x1800x1800 | 1720x1300x2200 | 2100x1680x2100 | 2100x1300x2100 | 2000x1980x2520 |
Mass weight | 251kg | 405kg | 383kg | 557kg | 617kg | 783kg |
Drive power | tractor PTO | tractor PTO | tractor PTO | tractor PTO | tractor PTO | tractor PTO |
Matched HP | 25hp-50hp | 35hp-60hp | 35hp-60hp | 60hp-100hp | 60hp-100hp | 75hp-120hp |
One 40HQ | 52 units | 56 units | 26 units | Mix to save space | Mix to save space | 18 units |
EC Series Wood pulverizer
Model | EC18 | EC22 |
Engine type | Diesel engine | Diesel engine |
power(HP) | 18 | 22 |
Chipper capacity | 6”diameter/ 150mm | |
Feeding system | Mechanical Roller feeding | |
Rotor plate size | 600mm | |
Rotor plate weight | 83kg | |
Knives number | 1 stationaryknife:2rotor knives | |
Dimensions(Hopper discharge)(mm) | 1300×1400×1100 | |
Feed Hopper inner Opening (mm) | 200 x 220 | |
Discharge Hood Height | 1800 | |
Rated RPM | 1080 | |
Weight | 680kg |
YL-50 Remote Control Crawler Lawn Mower
Model | YL-50 | |
Power Type | Four-stroke Diesel 178F | |
Fuel Tank Capacity | 3.5 Liters | |
Start Method | Electric start + hand pull | |
Standard Fuel Consumption | 1.2 Liters/hour | |
Number of Blades | 10x3 Pieces | |
Power Generation | 1500W | |
Motor Power | 2x600W Brushless | |
Battery Specification | 12V22.3A | |
Mowing Width | 50 CM | |
Stubble Height | 3-8 CM | |
Working Slope | Less than 40 degrees | |
Mowing Height | 5-150 CM | |
Remote Control Distance | 400 Meters | |
Lifting Method | Manual Adjustment | |
Track Width | 150 MM | |
Complete Size | 100x98x75 CM | |
Machine Weight | 200 KG |
Tracked CK-300 Remote Control Gasoline Wood Chipper Details
Related products
YL- 22 Gasoline Leaf Shredder
Model | YL-22 | |
Power Type | Gasoline 190F | |
Start Mode | Manual | |
Output Power | 8kW/4.5kW | |
Cutterhead diameter | 344mm | |
Cutterhead speed | 3600rpm | |
Working diameter range | 10-50mm | |
Blade specifications | 120x34x4.6 2 pieces 305x50x5 1 piece | |
Feed port size | 48x42mm | |
Dimensions | 1100x780x705 mm | |
Total Weight | 84Kg | |
Movement method | Manual traction | |
Battery or cable specifications | None | |
Maximum walking speed | Pace speed | |
Workload per hour | 300-600Kg/h | |
Optional | Gasoline177F |
TL-CK300 Wood Chipper
Model | TL-CK300 | |
Power Type | Gasoline 190F | |
Start Mode | Electric Start | |
Output Power | 8kW | |
Cutterhead diameter | 230mm | |
Cutterhead speed | 3400rpm | |
Working diameter range | 10- 100mm | |
Workload per hour | 800-1000Kg/h | |
Feed port size | 60x60mm | |
Blade specifications | A8-295x55x8mm | |
Dimensions | 2500x950x1300 mm | |
Total Weight | 176 Kg | |
Movement method | Locomotive pulling | |
Battery or cable specifications | 12V20AH | |
Maximum walking speed | 0-40km/h | |
Tire Size | 400-8 | |
Optional | Diesel 190F | |
Diesel 192F |
Q-170 Q-200 Wood Chipper
Model | Q-170 | |
Power Type | Gasoline 170F | |
Start Mode | Manual | |
Output Power | 8HP | |
Cutterhead diameter | 180 mm | |
Cutterhead speed | 2900rpm | |
Working diameter range | 10-50mm | |
Workload per hour | 400-600 Kg/h | |
Feed port size | 400x1100x500 | |
Discharge port size | 150x800x100mm | |
Dimensions | 1100x600x1660 mm | |
Total Weight | 90 Kg | |
Optional | Gasoline 170F Electric Start | |
Diesel 173F Manual Start | ||
Diesel 173F Electric Start |
Model | Q-200 | |
Power Type | Gasoline 190F | |
Start Mode | Electric Start | |
Output Power | 11HP | |
Cutterhead diameter | 230 mm | |
Cutterhead speed | 3400rpm | |
Working diameter range | 10-100mm | |
Workload per hour | 400-800 Kg/h | |
Feed port size | 520x580mm | |
Discharge port size | 880x220x100mm | |
Dimensions | 1400x600x1100 mm | |
Total Weight | 140 Kg | |
Optional | 3 knives |
C-200 C-300 Diesel Horizontal Branch Grinder
Model | C-200 | |
Power Type | Diesel 190F | |
Start Mode | Electric Start | |
Output Power | 13HP | |
Cutterhead diameter | 230 mm | |
Cutterhead speed | 3400rpm | |
Working diameter range | 10-800mm | |
Workload per hour | 700-900 Kg/h | |
Blade specifications | A8-195*55*8 | |
Dimensions | 1500*600*1200 mm | |
Total Weight | 160 Kg | |
Feed port size | 520x580mm | |
Discharge port size | 880x220x100mm | |
Movement method | Manual traction | |
Battery or cable specifications | 36A-12V | |
Maximum walking speed | Pace Speed | |
Tire Size | 500-6 | |
Optional | Diesel 190F, 3 knives | |
Diesel 192F | ||
Diesel 192F, 3 knives |
Model | C-300 | |
Power Type | Diesel 190F | |
Start Mode | Electric Start | |
Output Power | 15HP | |
Cutterhead diameter | 230 mm | |
Cutterhead speed | 3400rpm | |
Working diameter range | 10-1000mm | |
Workload per hour | 900-1200 Kg/h | |
Blade specifications | A8-295*55*8 | |
Feed port size | 600x700mm | |
Discharge port size | 900x320x100mm | |
Dimensions | 1550*700*1200 mm | |
Total Weight | 185 Kg | |
Movement method | Manual traction | |
Battery or cable specifications | 36A-12V | |
Maximum walking speed | Pace Speed | |
Tire Size | 500-6 | |
Optional | Diesel 192F, 2 knives | |
Diesel 195F, 2 knives | ||
Diesel 190F, 3 knives | ||
Diesel 192F, 3 knives | ||
Diesel 195F, 3 knives |
BX Series PTO drive wood pulverizer
Model | BX42S | BX42R | BX62S | BX62R | BX72R | BX92R |
Chipper Capacity | 100mm | 100mm | 150mm | 150mm | 175mm | 200mm |
Diameter of blade | 630mm | 630mm | 740mm | 740mm | 740mm | 940mm |
Thickness | 18mm | 18mm | 25mm | 25mm | 28mm | 32mm |
Rotor plate weight | 44kg | 44kg | 86.5kg | 86.5kg | 86.5kg | 171kg |
Rated RPM | 540-1000 | 540-1000 | 540-1000 | 540-1000 | 540-1000 | 540-1000 |
Quantity of blade | 4 | 4 | 4 | 4 | 4 | 4 |
Knife Type | 65-Mn/A8 | 65-Mn/A8 | 65-Mn/A8 | 65-Mn/A8 | 65-Mn/A8 | 65-Mn/A8 |
Dimension of blades | 210x60x9mm | 210x60x9mm | 240x60x9mm | 240x60x9mm | 280x80x12mm | 320x100x17mm |
Feed port size | 520x520mm | 520x520mm | 620x620mm | 620x620mm | 830x600mm | 620x620mm |
Feeding System Feed | / | Hydraulic Feed | / | Hydraulic Feed | Hydraulic Feed | Hydraulic Feed |
Discharge port size | 100mm | 100mm | 150mm | 150mm | 200mm | 220mm |
Size of chippers | =6mm | ≤6mm | ≤6mm | ≤6mm | ≤9mm | ≤9mm |
Packing size | 1140x910x1240 | 1140x810x1920 | 1230x1000x1160 | 1220x910x1930 | 1690x1130x1380 | 1210x1130x2000 |
Overall size | 1470x1260x1650 | 1560x1800x1800 | 1720x1300x2200 | 2100x1680x2100 | 2100x1300x2100 | 2000x1980x2520 |
Mass weight | 251kg | 405kg | 383kg | 557kg | 617kg | 783kg |
Drive power | tractor PTO | tractor PTO | tractor PTO | tractor PTO | tractor PTO | tractor PTO |
Matched HP | 25hp-50hp | 35hp-60hp | 35hp-60hp | 60hp-100hp | 60hp-100hp | 75hp-120hp |
One 40HQ | 52 units | 56 units | 26 units | Mix to save space | Mix to save space | 18 units |
EC Series Wood pulverizer
Model | EC18 | EC22 |
Engine type | Diesel engine | Diesel engine |
power(HP) | 18 | 22 |
Chipper capacity | 6”diameter/ 150mm | |
Feeding system | Mechanical Roller feeding | |
Rotor plate size | 600mm | |
Rotor plate weight | 83kg | |
Knives number | 1 stationaryknife:2rotor knives | |
Dimensions(Hopper discharge)(mm) | 1300×1400×1100 | |
Feed Hopper inner Opening (mm) | 200 x 220 | |
Discharge Hood Height | 1800 | |
Rated RPM | 1080 | |
Weight | 680kg |
YL-50 Remote Control Crawler Lawn Mower
Model | YL-50 | |
Power Type | Four-stroke Diesel 178F | |
Fuel Tank Capacity | 3.5 Liters | |
Start Method | Electric start + hand pull | |
Standard Fuel Consumption | 1.2 Liters/hour | |
Number of Blades | 10x3 Pieces | |
Power Generation | 1500W | |
Motor Power | 2x600W Brushless | |
Battery Specification | 12V22.3A | |
Mowing Width | 50 CM | |
Stubble Height | 3-8 CM | |
Working Slope | Less than 40 degrees | |
Mowing Height | 5-150 CM | |
Remote Control Distance | 400 Meters | |
Lifting Method | Manual Adjustment | |
Track Width | 150 MM | |
Complete Size | 100x98x75 CM | |
Machine Weight | 200 KG |
Picture display of tractors produced by our company
Our company produces other agricultural machinery display
Picture display of tractors produced by our company
Our company produces other agricultural machinery display
Factory introduction
Shandong Euro Start Machinery Manufacture Co., Ltd
Shandong Euro Star Machinery Manufacture Co., Ltd. is a professional machinery and equipment manufacturer integrating R&D, design, manufacturing, sales and service. Our company's products cover agricultural machinery, construction machinery, laser equipment, generator sets and so on. As a professional machinery equipment manufacturer in China, we have committed to provide all-round solution to global modern agricultural mechanization. We are integrating high-end products and technologies resources around the world by upgrading of technologies, quality and service and bringing forth new ideas to create innovative products as so to improve reputation and market share of eurostar in the world step by step.
Our company have passed the ISO9001:2015 international quality management system certification, and based on this, covering product development, part purchase, production and manufacturing, quality inspection, sales and after-market service, so as to control the product quality on the whole. Supported by comprehensive quality assurance system and developed sales and service network, we have made leaping increase of sales in domestic market via trustful quality and outstanding service mode. Besides, most of our products have passed the European CE certification. Now our products are exported to Europe, America, Latin America, the Middle East,Asia-Pacific, CIS, Africa and more than 80 countries and regions. Our products have been recognized by all foreign customers, and we are happy to establish long-term cooperative relationships with new friends.
Aiming at satisfying the customers, we have worked hard to provide excellent and quick service to customers both at home and abroad via advanced technologies, developed products and comprehensive network so as to maximize the customer satisfaction.
In future, we will adhere to the principle of sound business operation, continuous innovation and opening up and cooperation to create more high-end machinery and equipment based on current ones for the society and for agriculture and contribute to global modern agriculture production.
Agricultural machinery factory production equipment display
Service
One-stop business chain service support system
With an international service team with rich experience and excellent skill, company is committed to build a complete service guarantee system, which is professional, fast, efficient and comprehensive. Every consumer in overseas would receive a full-process service guarantee including pre-sales, on sale and after sales through the way of markets, spare parts, training service and technical support.
1) Market Service
Service Mode : Stationary Point + Circuit Service
Long-term Stationary Point Service
Short-term Circuit Technology Support Service
Service Process: Standard, High Efficient, Seasonable
Service Image: Professional, Unified
2) Spare Parts Service
Spare Parts Guarantee Measures: Dealer+ Spare Part Warehouse
100% original spare parts assure good quality;
Bar-code system adopted in the whole process assures accuracy and promptness;
Professional and accurate package and logistics assure safe and relieved transportation.
3) Training Service
Characteristic Training Mode: invite the technicians of dealers to factory for training, send engineers to dealers for training;
A full range of training tools, multi-language training materials, vivid training video;
Professional training teachers with rich service experience and good communication capability;
One-to-one special assignment training;
Remote online network training;
4) Technical Support
The whole process Technology support covers on sale and after-sale service.
Terms of the deal:
1). Delivery: 20 days for normal orders
2). Price: We have price on basis FOB Qingdao and CIF your destination for your choice
3). Payment terms for first order:
-----T/T 30% deposit and balance before shipment
-----100% L/C at sight
4). Payment for long terms cooperation of good reputation partners, we have SINOSURE insurance for our VIP clients, and we can offer credit service after we familiar with each other. We are looking for partnership for long-term business
FAQ:
Why choose us?
1). The quality is guaranteed due to strong technical support ,first class component ,advanced production line and strict quality control system.
2). Be leading Expert in global market for more than 5 years, China Famous Export Brand recommended by CCCME (China Chamber of Commerce for Import and Export of Machinery and Electronic Products)
3). One-stop service with a large spare parts warehouse and professional service team .No matter where you are, you are guaranteed of Eurostar' s warm reception, trustworthy and efficient professional services and persistent care.
How Shipment?
We have worked with many world famous shipping carriers and can arrange shipment to any country in the world, it can save your time and money. We can provide airfreight and ocean service.
Contact us
Mr. Duke Zhang
Shandong Euro Star Machinery Manufacture Co., Ltd.
Add: 198 Changning Street, Fangzi District, Weifang City, Shandong Province,P.R.C.
Web:eurostartractor.en.made-in-china.com
EUROSTAR CUSTOMERS ALL OVER THE WORLD
Factory introduction
Shandong Euro Start Machinery Manufacture Co., Ltd
Shandong Euro Star Machinery Manufacture Co., Ltd. is a professional machinery and equipment manufacturer integrating R&D, design, manufacturing, sales and service. Our company's products cover agricultural machinery, construction machinery, laser equipment, generator sets and so on. As a professional machinery equipment manufacturer in China, we have committed to provide all-round solution to global modern agricultural mechanization. We are integrating high-end products and technologies resources around the world by upgrading of technologies, quality and service and bringing forth new ideas to create innovative products as so to improve reputation and market share of eurostar in the world step by step.
Our company have passed the ISO9001:2015 international quality management system certification, and based on this, covering product development, part purchase, production and manufacturing, quality inspection, sales and after-market service, so as to control the product quality on the whole. Supported by comprehensive quality assurance system and developed sales and service network, we have made leaping increase of sales in domestic market via trustful quality and outstanding service mode. Besides, most of our products have passed the European CE certification. Now our products are exported to Europe, America, Latin America, the Middle East,Asia-Pacific, CIS, Africa and more than 80 countries and regions. Our products have been recognized by all foreign customers, and we are happy to establish long-term cooperative relationships with new friends.
Aiming at satisfying the customers, we have worked hard to provide excellent and quick service to customers both at home and abroad via advanced technologies, developed products and comprehensive network so as to maximize the customer satisfaction.
In future, we will adhere to the principle of sound business operation, continuous innovation and opening up and cooperation to create more high-end machinery and equipment based on current ones for the society and for agriculture and contribute to global modern agriculture production.
Agricultural machinery factory production equipment display
Service
One-stop business chain service support system
With an international service team with rich experience and excellent skill, company is committed to build a complete service guarantee system, which is professional, fast, efficient and comprehensive. Every consumer in overseas would receive a full-process service guarantee including pre-sales, on sale and after sales through the way of markets, spare parts, training service and technical support.
1) Market Service
Service Mode : Stationary Point + Circuit Service
Long-term Stationary Point Service
Short-term Circuit Technology Support Service
Service Process: Standard, High Efficient, Seasonable
Service Image: Professional, Unified
2) Spare Parts Service
Spare Parts Guarantee Measures: Dealer+ Spare Part Warehouse
100% original spare parts assure good quality;
Bar-code system adopted in the whole process assures accuracy and promptness;
Professional and accurate package and logistics assure safe and relieved transportation.
3) Training Service
Characteristic Training Mode: invite the technicians of dealers to factory for training, send engineers to dealers for training;
A full range of training tools, multi-language training materials, vivid training video;
Professional training teachers with rich service experience and good communication capability;
One-to-one special assignment training;
Remote online network training;
4) Technical Support
The whole process Technology support covers on sale and after-sale service.
Terms of the deal:
1). Delivery: 20 days for normal orders
2). Price: We have price on basis FOB Qingdao and CIF your destination for your choice
3). Payment terms for first order:
-----T/T 30% deposit and balance before shipment
-----100% L/C at sight
4). Payment for long terms cooperation of good reputation partners, we have SINOSURE insurance for our VIP clients, and we can offer credit service after we familiar with each other. We are looking for partnership for long-term business
FAQ:
Why choose us?
1). The quality is guaranteed due to strong technical support ,first class component ,advanced production line and strict quality control system.
2). Be leading Expert in global market for more than 5 years, China Famous Export Brand recommended by CCCME (China Chamber of Commerce for Import and Export of Machinery and Electronic Products)
3). One-stop service with a large spare parts warehouse and professional service team .No matter where you are, you are guaranteed of Eurostar' s warm reception, trustworthy and efficient professional services and persistent care.
How Shipment?
We have worked with many world famous shipping carriers and can arrange shipment to any country in the world, it can save your time and money. We can provide airfreight and ocean service.
Contact us
Mr. Duke Zhang
Shandong Euro Star Machinery Manufacture Co., Ltd.
Add: 198 Changning Street, Fangzi District, Weifang City, Shandong Province,P.R.C.
Web:eurostartractor.en.made-in-china.com
EUROSTAR CUSTOMERS ALL OVER THE WORLD