The business scope covers road transport machinery, harvesting machinery, plant protection machinery, farm tools, agricultural drones and so on
Add: The West of Chang Ning Street ,Fang zi District,Weifang City, Shandong, Province,P.R.C.
Mobile:86 18606366000
Tel: +86 536 7662277
Fax:+86 536 7662299
Hotline: 400 -678-8895
Mail:
ouxingzhizao@126.com
Website: www.ouxingzhizao.com
News show
How to use rotary tiller correctly

1. Homework, rotary cultivator should be in a state of ascension, combined with the power output shaft first, make the knife shaft speed increased to rated speed, and then drop rotary cultivator, make blade gradually the grave to the required depth. It is strictly forbidden to combine the power output shaft or the sharp drop rotary cultivator after the blade enters the soil, so as not to cause the blade to bend or break and increase the load of the tractor.
2. In the operation, slow and slow motion should be kept as low as possible so as to ensure the quality of the work, to make the clods finely and to reduce the wear and tear of the pieces. Pay attention to whether there are murmurs or metal percussion of the tiller, and observe the soil and the depth of the ploughing. If any abnormality should be stopped immediately for inspection, the operation can be continued after removal.
3. During the turn of the earth, the operation should be banned, and the rotary tiller should be raised to get the blade off the ground and reduce the tractor throttle to avoid damaging the blade. When the rotary cultivator is promoted, the Angle of the wanxiang operation should be less than 30 degrees, and the impact noise will be generated when it is too large, so that it can be worn or damaged prematurely.
4. When reversing, building ridges and transferring plots, the rotary tiller should be raised to the highest position and cut off the power to avoid damage to the machine parts. If you move away from the distance, use the locking device to secure the rotary tiller.
5. After each shift operation, the rotary cultivator should be maintained. Remove dirt and weeds from the blade, check the fastening conditions of each connector, add lubricating oil to each lube point, and add butter to the universal joint in case of aggravating wear.

 
 
Home  |  Company profile  |  Product display  |  News show  |  Industry dynamic  |  Sales network  |  Online message  |  Contact us
Shandong Euro Star Machinery Manufacture Co., Ltd.
Add: The West of Chang Ning Street ,Fang zi District,Weifang City, Shandong, Province,P.R.C.  Mail: ouxingzhizao@126.com
Mobile:86 18606366000  Tel: +86 536 7662277  Fax:+86 536 7662299  Hotline: 400 -678-8895